Pfaff creative 7570 Owner's Manual - Page 204

1 21 3 4 5 61 890 r I +r 1 øv Messages in the display Then select the pattern on the machine with the corresponding number key. The embroidery frame normalizes, i.e. it searches for the starting position. At the same time the following messages appear in the display: • Fit fabric in frame "1 20" (or "80") and insert • Lowerfeed dog • Insert full bobbin • Attach embroidery foot and bring sewing foot lifter to embroidery position. ok? Fit fabric in frame "1 20" (or "80") and insert This message appears on a dark background which illustrates the importance of this line, Either a 1 20 or an 80 frame must be fitted with material and inserted. Lower feed dog The feed dog must be lowered to be able to embroider with the embroidery unit. If this is not the case the machine does not start when the foot pedal is pushed and the following message appears: Lower feed dog ok? Insert full bobbin It is recommended to insert a full bobbin before starting to embroider. We recommend using cotton garn with thickness 50 as the bobbin thread or a polyester yarn 1 00. The bobbin thread monitor display blinks when the bobbin thread is running out. The sewing machine stops and the following message is displayed: Bobbin thread low ok? Attach embroidery foot and bring sewing foot lifter to embroidery position Before beginning to embroider, the embroidery foot must be attached (see Instruction manual 7570 page 11 0) and the sewing foot lifter must be in embroidering position. If this is not the case the machine stops when the foot pedal is pressed and elicits the message: Sewing foot holder not in embroidery position ok? Now lower the feed dog and insert a full bobbin. Attach the embroidery foot and set the sewing foot holder to the correct position (see 7570 Instruc tions page 11 0). Important: The Integrated Dual Feed (top feed) must be switched off. By pressing the "ok' key, the selected pattern is shown in the display. The embroidery frame goes to the pattern start. If you wish to embroider another pattern, return to the selection menu with the "esc" key and select a new pattern. ii ii I I 17