Pfaff creative 7570 Owner's Manual - Page 159

- J j I I I Changing the needle plate Cleaning and lubricating 3 • Switch off the master switch. • Raise the sewing foot lifter. • Switch off the master switch. • Remove the needle plate and lower the feed • Pull the needle plate upwards at the back and dog. j remove it. • Clean the feed dog and hook area with the brush. 3 Replacement • Lay the back of the needle plate down flat and push it down at the front until you hear it snap • Apply one drop of oil only to the hook as shown above. The machine is otherwise main tenance free and must not be oiled in other into place. places. j Before you start sewing, check that the needle plate is lying flat. • Clean and oil the sewing machine every 10 to 15 hours of operation. Cleaning the display When needed, clean the display. using a dry, soft, lint-free cloth. Do not use chemical cleaners or solvents! 157