Pioneer P4000 Owner's Manual - Page 39
Setting the rear output and, subwoofer controller, Changing languages for CAUTION, Switching
UPC - 012562547978
View all Pioneer P4000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
Operating this unit Section 03 Operating this unit Switching the auxiliary 1 setting % Touch AUX1 on the initial menu to select desired setting. ! VIDEO - an iPod with video capabilities connected with 4-pole mini plug cable (e.g., CD-V150M) ! AUDIO - auxiliary device connected with stereo mini plug cable ! OFF - No auxiliary device is connected Switching the auxiliary 2 setting % Touch AUX2 on the initial menu to turn auxiliary 2 setting on. # To turn auxiliary 2 setting off, touch AUX2 again. 3 Touch c or d next to PREOUT to switch the subwoofer output or rear output. Touching c or d will switch between S.W and REAR and that status will be displayed. Notes ! Even if you change this setting, there is no output unless you turn the subwoofer output on (refer to Using subwoofer output on page 33). ! If you change this setting, subwoofer output in the audio menu return to the factory settings. ! Both rear speaker lead outputs and RCA rear output are switched simultaneously in this setting. Setting the rear output and subwoofer controller This unit's rear output (rear speaker leads output and RCA rear output) can be used for fullrange speaker (FULL) or subwoofer (S.W) connection. If you switch the rear output setting to S.W, you can connect a rear speaker lead directly to a subwoofer without using an auxiliary amp. Initially, the unit is set for rear full-range speaker connection (FULL). When rear output is connected to full range speakers (when FULL is selected), you can connect other full range speakers (REAR) or a subwoofer (S.W) to the RCA rear output. ! When the multi-channel processor (e.g., DEQ-P8000) is connected to this unit, you cannot operate this function. 1 Touch REAR SP on the initial menu. 2 Touch c or d next to REAR SP to switch the rear output setting. Touch c to select full-range speaker and FULL appears in the display. Touch d to select subwoofer and S.W appears in the display. # When no subwoofer is connected to the rear output, select FULL (full-range speaker). # When a subwoofer is connected to the rear output, select S.W (subwoofer). # When the rear output setting is S.W, you cannot operate the following procedure. Changing languages for CAUTION Some operations on this unit are prohibited while driving or needs to be paid a careful attention when operating. In such case, a caution appears on the display. You can change the language of the cautions at this setting. % Touch CAUTION LANGUAGE on the initial menu to select your desired language. Each time you touch CAUTION LANGUAGE it selects languages for CAUTION in the following order: ENGLISH-ESPAÑOL-FRANÇAIS Switching the sound muting/ attenuation Sound from this system is muted or attenuated automatically when the signal from the equipment with mute function is received. ! Sound from this system returns to normal when the muting or attenuation is canceled. % Touch TEL to select any of the muting, attenuation or off. Touch TEL until the desired setting appears in the display. ! MUTE - Muting ! ATT -20dB - Attenuation (ATT -20dB has a stronger effect than ATT -10dB) ! ATT -10dB - Attenuation En 39