Pioneer P4000 Owner's Manual - Page 77

Available accessories Section 04 Available accessories 4 Touch c or d to adjust the distance between the selected speaker and the listening position. Each time you touch c or d increases or decreases the distance. 0.0inch to 200.0inch is displayed as the distance is increased or decreased. Using the equalizer The equalizer lets you adjust the equalization to match the car's interior acoustic characteristics as desired. Recalling equalizer curves There are seven stored equalizer curves which you can easily recall at any time. Here is a list of the equalizer curves. Display POWERFUL NATURAL VOCAL FLAT CUSTOM1 CUSTOM2 SUPER BASS Equalizer curve Powerful Natural Vocal Flat Custom 1 Custom 2 Super bass ! CUSTOM1 and CUSTOM2 are adjusted equalizer curves. ! When FLAT is selected, no supplement or correction is made to the sound. This is useful to check the effect of the equalizer curves by switching alternatively between FLAT and a set equalizer curve. % Press EQ repeatedly to switch between the following equalizers: POWERFUL-NATURAL-VOCAL-FLAT- CUSTOM1-CUSTOM2-SUPER BASS Adjusting 3-band parametric equalizer For CUSTOM1 and CUSTOM2 equalizer curves, you can adjust the front, rear and center equalizer curves separately by selecting a center frequency, an equalizer level and a Q factor for each band. ! A separate CUSTOM1 curve can be cre- ated for each source. ! A CUSTOM2 curve can be created com- mon to all sources. ! The center speaker largely determines the sound image and getting the balance right isn't easy. We recommend reproducing a 2ch. audio (a CD for example) and getting the balance right among the speakers except for the center, and then reproducing a 5.1-ch. audio (Dolby Digital or DTS) and adjusting the center speaker output to the balance you have already got among the other speakers. 1 Touch NEXT twice on the DSP function menu. 2 Touch PARAMETRIC EQ. 3 Touch a or b to select the desired item. Each time you touch a or b selects the item in the following order: EQ (equalizer)-SP-SELECT (speakers)- BAND (bands)-FREQUENCY (center frequency)-LEVEL (equalizer level)- Q. FACTOR (Q factor) 4 Touch d to select the equalizer. Touch d repeatedly to switch between the following equalizers: POWERFUL-NATURAL-VOCAL-FLAT- CUSTOM1-CUSTOM2-SUPER BASS 5 Touch b and then touch c or d to select the speaker to be adjusted. Touch c or d until the desired speaker appears in the display. REAR (rear speakers)-CENTER (center speaker)-FRONT (front speakers) # You cannot select speakers whose size is set at OFF. (Refer to Setting the speaker setting on page 74.) 6 Touch b and then touch c or d to select the equalizer band to be adjusted. Each time you touch c or d selects equalizer bands in the following order: En 77