Ricoh Aficio MP C3000 General Settings Guide - Page 15
Connecting to the USB Interface, Connect the other end to the USB2.0 port on the host computer.
View all Ricoh Aficio MP C3000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
E Turn on the main power switch of the machine. Connecting to the Interfaces 1 AME005S A Indicator (green) Lights up green when the machine is connected correctly to the network. B Indicator (yellow) Lights up yellow when 100 BASE-TX is in operation. Goes off when 10 BASE-T is in operation. Note ❒ For details about installing the printer driver, see "Preparing the Ma- chine", Printer Reference. Reference "Turning On the Power", About This Machine "Preparing the Machine", Printer Reference Connecting to the USB Interface Connect the USB2.0 interface cable to the USB2.0 port. A Connect the USB2.0 interface cable to the USB2.0 port. AMB013S B Connect the other end to the USB2.0 port on the host computer. 7
Connecting to the Interfaces
7
1
E
Turn on the main power switch of the machine.
A
Indicator (green)
Lights up green when the machine is connected correctly to the network.
B
Indicator (yellow)
Lights up yellow when 100 BASE-TX is in operation. Goes off when 10
BASE-T is in operation.
Note
❒
For details about installing the printer driver, see “Preparing the Ma-
chine”, Printer Reference.
Reference
“Turning On the Power”, About This Machine
“Preparing the Machine”, Printer Reference
Connecting to the USB Interface
Connect the USB2.0 interface cable to the USB2.0 port.
A
Connect the USB2.0 interface cable to the USB2.0 port.
B
Connect the other end to the USB2.0 port on the host computer.
AME005S
AMB013S