Ricoh Aficio MP C3000 General Settings Guide - Page 30
IEEE 1394 (IPv4 over 1394
View all Ricoh Aficio MP C3000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Connecting the Machine IEEE 1394 (IPv4 over 1394) This section lists the settings required for sending e-mail with IEEE 1394 inter- face cable. 1 For details about how to specify the settings, see "Interface Settings" and "File Transfer". Menu User Tool Setting Requirements Interface Settings/IEEE 1394 IPv4 Address Neccessary Interface Settings/IEEE 1394 DDNS Configuration As required Interface Settings/IEEE 1394 Host Name As required Interface Settings/IEEE 1394 Domain Name Interface Settings/IEEE 1394 WINS Configuration Interface Settings/IEEE 1394 IPv4 over 1394 Interface Settings/Network IPv4 Gateway Address Interface Settings/Network DNS Configuration Interface Settings/Network Effective Protocol File Transfer SMTP Server File Transfer SMTP Authentication File Transfer POP before SMTP File Transfer Reception Protocol As required As required Neccessary Neccessary As required Neccessary Neccessary As required As required As required File Transfer POP3 / IMAP4 Settings As required File Transfer Administrator's E-mail Address As required File Transfer E-mail Communication Port As required File Transfer Program / Change / Delete E-mail Message As required File Transfer Scanner Resend Interval Time As required File Transfer Number of Scanner Resends As required Note ❒ [IEEE 1394] is displayed when the IEEE 1394 interface board is installed. ❒ In [Effective Protocol], check that the protocol you want to use is set to [Active]. ❒ When [POP before SMTP] is set to [On], also make setting for [Reception Protocol] and [POP3 / IMAP4 Settings]. ❒ When setting [POP before SMTP] to [On], check[POP3] port number in [E-mail Communication Port]. Reference p.58 "Interface Settings" p.68 "File Transfer" 22