Ricoh Aficio MP C3000 General Settings Guide - Page 28
Settings Required to Use E-mail Function, Ethernet
View all Ricoh Aficio MP C3000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Connecting the Machine Note ❒ In [Effective Protocol], check that the protocol you want to use is set to [Active]. ❒ [IEEE 802.11b] and [LAN Type] are displayed when the wireless LAN interface 1 board is installed. If both Ethernet and wireless LAN (IEEE 802.11b) are connected, the selected interface takes precedence. ❒ [SMTP Server] and [Fax E-mail Account] must be specified in order to use the send function. ❒ When [POP before SMTP] is set to [On], also make setting for [Reception Protocol] and [POP3 / IMAP4 Settings]. ❒ When [SMTP Authentication] is set to [On], also make setting for [Administrator's E-mail Address]. ❒ [E-mail Communication Port] and [Fax E-mail Account] must be specified in order to use the reception function. ❒ When setting [POP before SMTP] to [On], check[POP3] port number in [E-mail Communication Port]. Reference p.58 "Interface Settings" p.68 "File Transfer" Settings Required to Use E-mail Function This section lists the settings required for sending e-mail. Ethernet This section lists the settings required for sending e-mail with Ethernet cable. For details about how to specify the settings, see "Interface Settings" and "File Transfer". Menu User Tool Setting Requirements Interface Settings/Network Machine IPv4 Address Neccessary Interface Settings/Network IPv4 Gateway Address Neccessary Interface Settings/Network DNS Configuration Interface Settings/Network DDNS Configuration Interface Settings/Network Domain Name Interface Settings/Network WINS Configuration Interface Settings/Network Effective Protocol Interface Settings/Network Ethernet Speed Interface Settings/Network LAN Type Interface Settings/Network Permit SNMPv3 Communication As required As required As required As required Neccessary As required Neccessary As required 20