Ricoh Aficio MP C5502 User Guide - Page 225

9. Adding Paper and Toner Paper Thickness Paper Thickness *1 Thin Paper *2 Plain Paper 1 Plain Paper 2 Middle Thick Thick Paper 1 Thick Paper 2 Thick Paper 3 Thick Paper 4 Paper weight 52-59 g/m2 (14-15 lb. Bond) 60-74 g/m2 (16-20 lb. Bond) 75-81 g/m2 (20 lb. Bond) 82-105 g/m2 (20-28 lb. Bond) 106-169 g/m2 (28 lb. Bond-90 lb. Index) 170-220 g/m2 (65-80 lb. Cover) 221-256 g/m2 (80 lb. Cover-140 lb. Index) 257-300 g/m2 (140 lb. Index-110 lb. Cover) *1 Print quality will decrease if the paper you are using is close to the minimum or maximum weight. Change the paper weight setting to thinner or thicker. *2 Depending on the type of thin paper, the edges may crease or the paper may be misfed. • Certain types of paper produce noise when delivered. This noise does not indicate a problem and print quality is unaffected. (Glossy paper and OHP transparencies can produce noise when delivered.) • The paper capacity described in the tables above is an example. Actual paper capacity might be lower, depending on the paper type. • When loading paper, make sure the stack height does not exceed the limit mark of the paper tray. • If multiple sheet feeding occurs, fan sheets thoroughly or load sheets one by one from the bypass tray. • Flatten out curled sheets before loading them. • When loading envelopes, see p.157 "Envelopes". • When loading thick paper of 106-300 g/m2 (28 lb. Bond-110 lb. Cover), see p.156 "Thick Paper". • When copying or printing onto letterhead paper, the paper placing orientation is different depending on which function you are using. See "Loading Orientation-Fixed Paper or Two-Sided Paper", Paper Specifications and Adding Paper . • The copy/print speed is slower than usual when copying or printing on thick paper of 106-300 g/m2 (28 lb. Bond-110 lb. Cover) or glossy sheets, or if resolution is set to 1200 dpi. 154