Ricoh Aficio MP C5502 User Guide - Page 280

When Messages Are Displayed on the Control Panel Message Causes Solutions "Output tray has been changed." The output tray was changed because the paper size of the specified output tray is limited. Specify the proper output tray. "Print overrun." Images were discarded while printing. PCL 6 Select a lower resolution on the printer driver. For details about how to change the resolution setting, see the printer driver Help. PostScript 3 Select a lower resolution on the printer driver. For details about how to change the resolution setting, see the printer driver Help. "Printing privileges have not been set for this document." The PDF document you have tried to print has no privileges to print. Contact the owner of the document. "Punch has been cancelled." Punch printing was canceled. Check the paper orientation, print orientation, and then punch position. Certain settings can produce print results that might not be as expected. "Receiving data failed." Data reception was aborted. Resend the data. "Selected ppr. size is not supported. Job was cancelled." Job reset is automatically performed if the specified paper size is incorrect. Specify the correct paper size, and then print the file again. "Sending data failed." The machine received a command to stop transmission from the printer driver. Check if the computer is working correctly. "Staple has been cancelled." Stapling printing was canceled. Check the paper orientation, paper quantity, print orientation, and staple position. Certain settings can produce print results that might not be as expected. 209