Samsung CLX-4195FW User Manual Ver.1.0 (English) - Page 190

IPv6 configuration DHCPv6 address configuration If you have a DHCPv6 server on your network, you can set one of the following options for default dynamic host configuration. • Accessing menus may differ from model to model (see "Accessing the menu" on page 33). • It may be necessary to press OK to navigate to lower-level menus for some models. 1 Select (Menu) > Network > TCP/IP (IPv6) > DHCPv6 Config on the control panel. Or select Setup> Machine Setup > Next > Network Setup > TCP/IP (IPv6) > DHCPv6 Config on the touch screen. 2 Press OK to select the required value you want. • DHCPv6 address: Always use DHCPv6 regardless of router request. • DHCPv6 Off: Never use DHCPv6 regardless of router request. • Router: Use DHCPv6 only when requested by a router. 11 From the SyncThru™ Web Service Activating IPv6 1 Access a web browser, such as Internet Explorer, from Windows. Enter the machine IP address (http://xxx.xxx.xxx.xxx) in the address field and press the Enter key or click Go. 2 If it's your first time logging into SyncThru™ Web Service you need to log-in as an administrator. Type in the below default ID and password. We recommend you to change the default password for security reasons. • ID: admin • Password: sec00000 3 When the SyncThru™ Web Service window opens, move the mouse cursor over the Settings of the top menu bar and then click Network Settings. 4 Click TCP/IPv6 on the left pane of the website. 5 Check the IPv6 Protocol check box to activate IPv6. 6 Click the Apply button. 7 Turn the machine off and turn it on again. 2. Using a Network-Connected Machine 190