Samsung CLX-4195FW User Manual Ver.1.0 (English) - Page 234

Fax To change the menu options: • Press (fax) > (Menu) > Fax Setup > Receiving on the control panel. • Or press Setup > Machine Setup > Next > Default Setting > Fax Default on the touch screen. • Or press Setup > Machine Setup> Next > Fax Setup on the touch screen. Item DRPD Mode Item Receive Mode Ring To Answer Stamp RCV Name Rcv Start Code Auto Reduction Discard Size Description Selects the default fax receiving mode (see "Changing the receive modes" on page 297). Specifies the number of times the machine rings before answering an incoming call. Automatically prints the page number, and the date and time of reception at the bottom of each page of a received fax. Initiates fax reception from an extension phone plugged into the EXT socket on the back of the machine. If you pick up the extension phone and hear fax tones, enter the code. It is preset to *9* at the factory. Automatically reduces an incoming fax page to fit the size of the paper loaded in the machine. Discards a specific length from the end of the received fax. Duplex Print Description Enables a user to use a single telephone line to answer several different telephone numbers. You can set the machine to recognize different ring patterns for each number. This setting may not be available depending on your country (see "Receiving faxes using DRPD mode" on page 299). Prints the received fax data on both sides of the paper. You can save the paper usage. • Off: Prints only one side of the paper. • Long Edge: Prints both sides of the paper; however, the binding will be the long edge. • Short Edge: Prints both sides of the paper; however, the binding will be the short edge. 3. Useful Setting Menus 234