Samsung SCD60 Instruction Booklet - Page 61
ENGLISH, Connection with PC
View all Samsung SCD60 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
RS-232C Data Transfer (SCD60 only) Connection with PC 1 Make sure that your camcorder, PC, and peripherals are switched off before you connect the RS-232C cable. 1.Connect RS-232C cable into the 9pin connector (COM port) on the back panel of your PC. 2.Connect RS-232C cable into the RS-232C terminal on the camcorder. 3. Turn on the PC, camcorder and other devices. 9 pin ENGLISH Note - You can use the 25pin D-sub adaptor (Not supplied) according to your PC type and specifications. 25 pin D-sub adapter converts serial port DB25 into serial port DB9. 61
ENGLISH
61
RS-232C Data Transfer (SCD60 only)
Make sure that your camcorder, PC, and peripherals are switched off before you connect the RS-232C cable.
1.Connect RS-232C cable into the 9pin connector (COM port) on the back panel of your PC.
2.Connect RS-232C cable into the RS-232C terminal on the camcorder.
3. Turn on the PC, camcorder and other devices.
Connection with PC
D-sub adapter converts
serial port DB25 into
serial port DB9.
25 pin
9 pin
Note
- You can use the 25pin D-sub adaptor (Not supplied) according to
your PC type and specifications.