Samsung SCD60 Instruction Booklet - Page 67

Tr o u b l e s h o o t i n g ENGLISH 1 If these instructions do not allow you to solve the problem, contact your nearest authorized service center. S y m p t o m E x p l a n a t i o n / S o l u t i o n You cannot switch the camcorder on. Check the battery pack or the AC Power Adaptor. START/STOP button does not operate while recording. Check the POWER switch, set to CAMERA. You have reached the end of the cassette. Check the record protection tab on the cassette. The camcorder goes off automatically. The battery pack is quickly e x h a u s t e d . When you see a blue screen during playback. You have left the camcorder set to STBY for more than 3minutes without using it. The battery pack is fully exhausted. The atmospheric temperature is too low. The battery pack has not been fully charged. The battery pack is completely dead, and cannot be recharged, Use another battery pack. The video heads may be dirty. Clean the head with a cleaning tape. A vertical strip appears on the The contrast between the subject and the background is too great for the camcorder to operate recorded screen of dark background. normally. Make the background bright to reduce the contrast or use the I-BLC/BLC function while you are recording. The image in the viewfinder is blurred. The Viewfinder lens has not been adjusted. Adjust the viewfinder control lever until the indicators displayed on the viewfinder come into sharp focus. Auto focus does not work. Check the M.FOCUS menu. Auto focus does not work in the Manual Focus mode. Play, FF or REW button do not work. When you see a broken block image during the EDIT SEARCH. Check the POWER switch. Set the power switch to VCR. You have reached the beginning or end of the cassette. It is the characteristic of this camcorder and it is not a failure or defect. 67