Samsung SCD60 Instruction Booklet - Page 66

ENGLISH Tr o u b l e s h o o t i n g Troubleshooting 1 Before contacting a service center, perform the following simple checks. They may save you the time and expense of an unnecessary call. Self Diagnosis Display Display Blinking Informs that... A c t i o n slow the battery pack is almost discharged. Change to a charged one. fast the battery pack is fully discharged. 2 M I N slow When the remaining time of the tape is about 3 minutes. TAPE END no the tape reached its end. Change to a charged battery. Prepare a new one. Change to a new one. TAPE slow there is no tape in camcorder. Insert a tape. TAPE slow the tape is protected to If you want to record, release the protection. C . E M G D . E M G L . E M G R . E M G DEW the camcorder has some slow mechanical fault. s l o w moisture condensation has formed in the camcorder. 1. Eject the tape. 2. Set to OFF. 3. Detach the battery. 4. Reattach the battery. * If repeated contact local service. see below. Moisture Condensation 1 If the camcorder is brought directly from a cold place to a warm place, moisture may condense inside the camcorder, on the surface of the tape, or on the lens. In this condition, the tape may stick to the head drum and be damaged or the unit may not operate correctly. To prevent possible damage under these circumstances, the camcorder is furnished with moisture sensor. 1 If there is moisture inside the camcorder, "DEW" is displayed. If this happens, none of the functions except cassette ejection will work. Open the cassette compartment and remove the battery. 66 Leave the camcorder for at least two hours in a dry warm room.