Samsung SCD60 Instruction Booklet - Page 64

Cleaning and Maintaining the Camcorder - problems

Get Samsung SCD60 PDF manuals and user guides View all Samsung SCD60 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 64 highlights

ENGLISH M a i n t e n a n c e Cleaning and Maintaining the Camcorder Cleaning the viewfinder • Releasing the Eyecup 1 2 1. Pull the VIEWFINDER up and then turn two screws counter-clockwise. 2. Pull EYECUP out. 3. Clean the EYECUP and the VIEWFINDER screen with a soft cloth and cotton swab or a blower. • Reattaching the Eyecup 4. Put the EYECUP on the VIEWFINDER. 5. Put screws back on. 3 4 Cleaning the Video Heads To ensure normal recording and clear pictures, clean the video heads when the playback pictures display square block-shaped picture noise or only the blue screen appears during playback, as the video heads may be dirty. 1. Set the power switch to PLAYER mode. 2. Insert the cleaning tape. 3. Press the (PLAY) button. 4. Press the (STOP) button after 10 seconds. Note - Check the quality of the picture using a video cassette. If it is still bad, repeat the operation. If the problem continues, contact your local authorized service center. - Clean the video heads with a dry type cassette cleaner. 64

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
ENGLISH
64
Maintenance
Cleaning and Maintaining the Camcorder
•
Releasing the Eyecup
1. Pull the VIEWFINDER up and then turn two screws counter-clockwise.
2.
Pull EYECUP out.
3.
Clean the EYECUP and the VIEWFINDER screen with a soft cloth and
cotton swab or a blower.
•
Reattaching the Eyecup
4. Put the EYECUP on the VIEWFINDER.
5. Put screws back on.
Cleaning the viewfinder
Cleaning the Video Heads
To ensure normal recording and clear pictures, clean the video heads when
the playback pictures display square block-shaped picture noise or only the blue
screen appears during playback, as the video heads may be dirty.
1. Set the power switch to PLAYER mode.
2. Insert the cleaning tape.
3. Press the
(PLAY) button.
4. Press the
(STOP) button after 10 seconds.
Note
- Check the quality of the picture using a video cassette. If it is still bad, repeat the operation.
If the problem continues, contact your local authorized service center.
- Clean the video heads with a dry type cassette cleaner.
1
2
3
4