Samsung SPH700AE User Manual (ENGLISH) - Page 14

Connections and Source Setup Connecting to Video Equipment Connections and Source Setup Before Connections Before Connections Check the followings before connecting the projector to other devices. Check the following Before Connecting 1. Refer to the manual of the device the projector is connected to. The number and position of ports may differ depending on type of devices. 2. Do not connect power until all the connections are completed. If you try to connect power while connecting cables, it may result in damage to the projector. 3. Check the type of ports the projector is connected to. Refer to "Rear Side and Cables" on page 14 for cables used for connection. 26 CONNECTING TO VIDEO EQUIPMENT Connecting to VCR/Camcorder/Cable Box Rear side of Projector S-Video Cable Video (Composite) Cable or VCR Rear Connection Cable Box Camcorder Connect COMPOSITE (yellow) input port of the projector to the VIDEO (yellow) OUT port of video equipment using the video cable. I If the video equipment has S-VIDEO OUT port, connect it to S-VIDEO input port of the projector. Viewing the picture COMPOSITE 1 S-VIDEO 2 1 Turn on the projector and press the COMPOSITE button to select Composite. Composite 2 Connect the projector and the video equipment via S-Video cable and press the S-VIDEO button to select S-Video. I When Composite Mode is not available, check the video cables are in place. I Check that the projector and the video equipment are turned off before connecting NOTE cables. I This projector does not support sound. (Separate audio system is needed for sound.) 27