Samsung SPH700AE User Manual (ENGLISH) - Page 41

Lamp Replacement, Structure of Screen Menu

Page 41 highlights

Structure of Screen Menu Other Information Structure of Screen Menu Menu Option Language : English √ Menu Position √ Menu Translucency : Opaque √ Menu Display Time : 120 Sec √ Move Enter Return Menu Option Language Menu Position Menu Translucency Menu Display Time English / Español / Français / Opaque / High / Medium / Low 5 / 10 / 30 / 60 / 90 / 120 / Stay On 80 Lamp Replacement Cautions on Lamp Replacement I Projector lamp requires replacement after. I Use the recommended lamp when replacing. Lamp specifications are defined in the user's manual. Replace with the same model provided with the projector. - Lamp Model Name : LAMP-MERCURY-Philips - Lamp Manufacture : Philips Lighting - Lamp Life Time : 2000Hrs - Lamp Type : 250W UHP - Lamp Part Number : BP47-00010A I Check that the power cord is unplugged before replacing lamps. I Wait for at least 30 minutes before replacing lamps to cool off the lamp unit after disconnecting power. I Lamp is a high-pressure product. Do not place near flammable materials or children. I Remove dirts or foreign materials around or inside the lamp unit using a proper vacuum device. I Be careful not to touch the lamp itself when handling the lamp unit. I If the lamp is poorly handled, it may result in poor picture quality or shorter life time of lamp. I The projector is will not operate normally if the cover is not locked completely after lamp replacement. Refer to LED information in the user's manual if the projector does not operate normally. Lamp Replacement Procedure 1 Detach the screw of the lamp cover. 2 Push to open the lamp cover in the direction of the arrow. 3 Detach the three screws. 4 Lift and grip the lamp handle in the direction of the arrow and pull it out. 5 Reverse the disassembly procedure to assemble the unit after replacement. I The Lamp is high- NOTE temperature highpressure product. Wait for at least 30 minutes to proceed after disconnecting power. I Be sure that the power cord is disconnected before proceeding. 81 Lamp Replacement Other Information

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42

Language
English / Español / Français /
Menu Position
Menu Translucency
Opaque / High / Medium / Low
Menu Display Time
5 / 10 / 30 / 60 / 90 / 120 / Stay On
Lamp Replacement
Other Information
Structure of Screen Menu
Other Information
Lamp Replacement
81
Detach the screw of the
lamp cover.
Push to open the lamp
cover in the direction of
the arrow.
Detach the three screws.
Lift and grip the lamp
handle in the direction of
the arrow and pull it out.
1
2
3
5
4
Reverse the disassembly
procedure to assemble the
unit after replacement.
80
Structure of Screen Menu
Menu Option
Projector lamp requires replacement after.
Use the recommended lamp when replacing. Lamp specifications are defined in the user’s
manual. Replace with the same model provided with the projector.
-
Lamp Model Name
: LAMP-MERCURY-Philips
-
Lamp Manufacture
: Philips Lighting
-
Lamp Life Time
: 2000Hrs
-
Lamp Type
: 250W UHP
-
Lamp Part Number : BP47-00010A
Check that the power cord is unplugged before replacing lamps.
Wait for at least 30 minutes before replacing lamps to cool off the lamp unit after
disconnecting power.
Lamp is a high-pressure product. Do not place near flammable materials or children.
Remove dirts or foreign materials around or inside the lamp unit using a proper vacuum
device.
Be careful not to touch the lamp itself when handling the lamp unit.
If the lamp is poorly handled, it may result in poor picture quality or shorter life time of
lamp.
The projector is will not operate normally if the cover is not locked completely after lamp
replacement. Refer to LED information in the user
s manual if the projector does not operate
normally.
Cautions on Lamp Replacement
Lamp Replacement Procedure
NOTE
The Lamp is high-
temperature high-
pressure product.
Wait for at least 30
minutes to proceed after
disconnecting power.
Be sure that the power
cord is disconnected
before proceeding.
Menu Option
Language
: English
Menu Position
Menu Translucency
: Opaque
Menu Display Time
: 120 Sec
Move
Enter
Return