Sanyo PLC-XC50A RS232C Extend - Page 21

CF_H - POS Command, CF_V - POS Command, CF_DDOTS Command

Get Sanyo PLC-XC50A - 2600 Lumens PDF manuals and user guides View all Sanyo PLC-XC50A manuals
Add to My Manuals
Save this manual to your list of manuals

Page 21 highlights

PLC-XC50/55 Expand Serial Command Functional Specifications 8.5.4 CF_H - POS Command Command "CF_H-POS_%1"[CR] "0000~nnnn" --- Directly select Horizontal Position setting value %1 "nnnn" shows maximum value, it is current Total Dots value - Display Dots value "UP Current Horizontal Position setting value + 1 "DN Current Horizontal Position setting value - 1 Details Set Horizontal Position value of PC signal. The value set by this command will not be saved to projector. Therefore, when turning into Standby mode or ALL is OFF, the value returns to original setting. This command is available in normal Power ON status. Acceptable "000"[CR] Response Unacceptable "101"[CR] ---- when Input for Video is selected 8.5.5 CF_V - POS Command Command "CF_V-POS_%1"[CR] "0000~nnnn" --- Directly select Vertical Position setting value %1 "nnnn" shows maximum value, it is current Total Line value - Display Line value "UP Current Vertical Position setting value + 1 "DN Current Vertical Position setting value - 1 Details Set Vertical Position value of PC signal The value set by this command will not be saved to projector. Therefore, when turning into Standby mode or ALL is OFF, the value returns to original setting. This command is available in normal Power ON status. Acceptable "000"[CR] Response Unacceptable "101"[CR] ---- When Input source is Video system 8.5.6 CF_DDOTS Command Command "CF_DDOTS_%1"[CR] "0100"~"nnnn" --- Directly select Display Dots setting value "nnnn" shows maximum value, it is current Total Dots value - Horizontal %1 Position value Even number is available and when odd number is set, it is rounded out. "UP Current Display Dots setting value + 2 "DN Current Display Dots setting value - 2 Details Set Display Dots value of PC signal The value set by this command will not be saved to projector. Therefore, when turning into Standby mode or ALL is OFF, the value returns to original setting. This command is available in normal Power ON status. Acceptable "000"[CR] Response Unacceptable "101"[CR] ---- When Input for Video is selected 21/67

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
PLC-XC50/55 Expand Serial Command Functional Specifications
21/67
8.5.4
CF_H – POS Command
Command
“CF_H-POS_%1”[CR]
%1
“0000~nnnn” --- Directly select Horizontal Position setting value
“nnnn” shows maximum value, it is current Total Dots value - Display Dots value
“UP” -------------- Current Horizontal Position setting value + 1
“DN” -------------- Current Horizontal Position setting value - 1
Details
Set Horizontal Position value of PC signal.
The value set by this command will not be saved to projector. Therefore, when
turning into Standby mode or ALL is OFF, the value returns to original setting.
This command is available in normal Power ON status.
Response
Acceptable
“000”[CR]
Unacceptable
“101”[CR] ---- when Input for Video is selected
8.5.5
CF_V – POS Command
Command
“CF_V-POS_%1”[CR]
%1
“0000~nnnn” --- Directly select Vertical Position setting value
“nnnn” shows maximum value, it is current Total Line value - Display Line value
“UP” -------------- Current Vertical Position setting value + 1
“DN” -------------- Current Vertical Position setting value – 1
Details
Set Vertical Position value of PC signal
The value set by this command will not be saved to projector. Therefore, when
turning into Standby mode or ALL is OFF, the value returns to original setting.
This command is available in normal Power ON status.
Response
Acceptable
“000”[CR]
Unacceptable
“101”[CR] ---- When Input source is Video system
8.5.6
CF_DDOTS Command
Command
“CF_DDOTS_%1”[CR]
%1
“0100”~”nnnn” --- Directly select Display Dots setting value
“nnnn” shows maximum value, it is current Total Dots value - Horizontal
Position value
Even number is available and when odd number is set, it is rounded out.
“UP” -------------- Current Display Dots setting value + 2
“DN” -------------- Current Display Dots setting value – 2
Details
Set Display Dots value of PC signal
The value set by this command will not be saved to projector. Therefore, when
turning into Standby mode or ALL is OFF, the value returns to original setting.
This command is available in normal Power ON status.
Response
Acceptable
“000”[CR]
Unacceptable
“101”[CR] ---- When Input for Video is selected