Sanyo PLC-XC50A RS232C Extend - Page 33
Setting Command, 10.1 CF_LANG Command, CF_AUTOSETUPPCADJ Command, CF_AUTOSETUPKEYSTONE Command
View all Sanyo PLC-XC50A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
PLC-XC50/55 Expand Serial Command Functional Specifications 8.10 Setting Command 8.10.1 CF_LANG Command Command "CF_LANG_%1"[CR] "ENG Select English "DEU Select German "FRA Select French "ITA Select Italian "ESP Select Spanish "POR Select Portuguese "NED Select Dutch "SVE Select Swedish %1 "RUS Select Russian "CHI Select Chinese "KOR Select Korean "JPN Select Japanese "FIN Select Finnish "POL Select Polish "HUN Select Hungarian "ROM Select Romanian Details Set language for OSD The language set by this command is stored in EEPROM and its setting is effective after ALL is OFF. This command is available in normal Power ON status. Acceptable "000"[CR] Response Unacceptable "Error Code"[CR] 8.10.2 CF_AUTOSETUPPCADJ Command Command "CF_AUTOSETUPPCADJ_%1"[CR] %1 "ON Set Auto PC ADJ. function to ON "OFF Set Auto PC ADJ. function to OFF Details Set/Cancel Auto PC adj. function This command is available in normal Power ON status. Note) Keystone, PC adj. and Input search cannot be set "Off" at one time. When Keystone and PC adj. status are Off, projector returns error code "101" by receiving this command to turn OFF Auto PC adj.. Response Acceptable "000"[CR] Unacceptable "Error Code"[CR] 8.10.3 CF_AUTOSETUPKEYSTONE Command Command "CF_AUTOSETUPKEYSTONE_%1"[CR] "AUTO Set Auto Keystone function to Auto %1 "MANUAL Set Auto Keystone function to Manual "OFF Set Auto Keystone function to OFF Details Set Keystone function of Auto setup This command is available in normal Power ON status. Note) Keystone, PC adj. and Input search cannot be set "Off" at one time. When Input search and PC adj. status are Off, projector returns error code "101" by receiving this command. Response Acceptable "000"[CR] Unacceptable "Error Code"[CR] 33/67