Sanyo PLC-XC50A RS232C Extend - Page 30
CF_HPOS Command
View all Sanyo PLC-XC50A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
PLC-XC50/55 Expand Serial Command Functional Specifications 8.7.8 CF_HPOS Command Command "CF_HPOS_%1"[CR] "015 15 "014 14 "002 2 "001 1 "000 0 %1 "-01 1 "-02 2 Details Response "-14 14 "-15 15 "UP Horizontal Position setting value + 1 "DN Horizontal Position setting value - 1 Set Horizontal Position This command is available in normal Power ON status. Note1) When Screen setting is not Custom, projector returns 101[CR] and the command does not execute. Note2) When there is no Input, projector returns 101 and the command does not execute. Acceptable "000"[CR] Unacceptable "Error Code"[CR] 30/67
PLC-XC50/55 Expand Serial Command Functional Specifications
30/67
8.7.8
CF_HPOS Command
Command
“CF_HPOS_%1”[CR]
%1
“015” --------- +15
“014” --------- +14
�
“002” --------- +2
“001” --------- +1
“000” --------- +
0
“-01” ---------- -1
“-02” ---------- -2
�
“-14” ---------- -14
“-15” ---------- -15
“UP” ---------- Horizontal Position setting value + 1
“DN” ---------- Horizontal Position setting value - 1
Details
Set Horizontal Position
This command is available in normal Power ON status.
Note1) When Screen setting is not Custom, projector returns 101[CR] and the
command does not execute.
Note2) When there is no Input, projector returns 101 and the command does not
execute.
Response
Acceptable
“000”[CR]
Unacceptable
“Error Code”[CR]