Sanyo PLC-XC50A RS232C Extend - Page 52
CR_MODELIST Command
View all Sanyo PLC-XC50A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
PLC-XC50/55 Expand Serial Command Functional Specifications 9.7.8 CR_MODELIST Command Command "CR_MODELIST"[CR] Details Get selectable Mode titles Acceptable "000_%1_%2_..._%x" [CR] Returns Error code "101" when Input is other than PC-Analog Returns Error code "101" when Input is PC-Analog but no signal Response %1 %2 : %x When Input is PC-Analog and signal is found, returns selectable Mode among Mode1 - 5 "MODE1" : : "MODE5 Unacceptable "Error Code"[CR] 52/67
PLC-XC50/55 Expand Serial Command Functional Specifications
52/67
9.7.8
CR_MODELIST Command
Command
“CR_MODELIST”[CR]
Details
Get selectable Mode titles
Response
Acceptable
“000_%1_%2_..._%x” [CR]
%1
%2
:
%x
Returns Error code “101” when Input is other than PC-Analog
Returns Error code “101” when Input is PC-Analog but no signal
When Input is PC-Analog and signal is found, returns selectable
Mode among Mode1 – 5
“MODE1”
:
:
“MODE5
Unacceptable
“Error Code”[CR]