Sanyo PLC-XC50A RS232C Extend - Page 23
Input Control Command, CF_INPUT Command, CF_SOURCE Command
View all Sanyo PLC-XC50A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
PLC-XC50/55 Expand Serial Command Functional Specifications 8.6 Input Control Command 8.6.1 CF_INPUT Command Command "CF_INPUT_%1"[CR] "CMP1-A Select Computer1 (Analog) Input "CMP1-D Select Computer1 (Digital) Input "COMPUTER2" ----- Select Computer2 Input %1 "VIDEO Select Video Input "UP Switch Input setting in forward direction CMP1-A -- CMP1-D -- Computer2 - Video ... "DN Switch Input setting in backward direction Video -- Computer2 -- CMP1-D -- CMP1-A ... Details Select Input The same operation as "INPUT" button of the projector and Remote Control. This command is available in normal Power ON status. When Computer 2 is set to "Monitor out " by Terminal setting, the projector returns "101" by selecting Computer 2 and the command is not executed. Acceptable "000"[CR] Response Unacceptable "Error Code"[CR] 8.6.2 CF_SOURCE Command Command "CF_SOURCE_%1"[CR] Input is Computer 1 (Analog) "ANALOG" --------- Select Analog Input "UP" "DN" Although there is no other alternative than "Analog", projector returns "OK". Input is Computer 1 (Digital) "DIGITAL" --------- Select DVI Input "HDCP Select DVI HDCP Input "UP Switch Input as follows DIGITAL -- HDCP -- DIGITAL ... "DN Switch Input as follows HDCP -- DIGITAL -- HDCP... "ANALOG" --------- Select Analog Input %1 "YPBPR Select Component Input Input is Computer 2 "SCART Select Scart Input "UP Switch Input as follows Analog -- YPBPR -- Scart -- Analog... "DN Switch Input as follows Scart -- YPBPR -- Analog -- Scart... Input is Video "AUTO Select Video Auto mode "VIDEO Select Composite Video Input "S VIDEO" -------- Select S-Video Input "UP Switch Input as follows Auto -- Video -- S-video -- Auto... "DN Switch Input as follows S-video -- Video -- Auto -- S-video... Details Select Source of currently selected Input When Input specified by %1 is inappropriate for selected Input, the projector returns "101" and the command is not executed. This command is available in normal Power ON status. Acceptable "000"[CR] Response Unacceptable "Error Code"[CR] 23/67