Sanyo PLC-XC50A RS232C Extend - Page 22

PLC-XC50/55 Expand Serial Command Functional Specifications 8.5.7 CF_DLINE Command Command "CF_DLINE_%1"[CR] "0100"~"nnnn" --- Directly select Display Line setting value "nnnn" shows maximum value, it is current Total Line value - Vertical %1 Position value "UP Current Display Line setting value + 1 "DN Current Display Line setting value - 1 Details Set Display Line value of PC signal The value set by this command will not be saved to projector. Therefore, when turning into Standby mode or ALL is OFF, the value returns to original setting. This command is available in normal Power ON status. Acceptable "000"[CR] Response Unacceptable "101"[CR] ---- When Input for Video is selected 8.5.8 CF_PCSTORE Command Command "CF_PCSTORE_%1"[CR] "MODE1" ---- Store current PC Adjust status to Mode1 "MODE2" ---- Store current PC Adjust status to Mode2 %1 "MODE3" ---- Store current PC Adjust status to Mode3 "MODE4" ---- Store current PC Adjust status to Mode4 "MODE5" ---- Store current PC Adjust status to Mode5 Details Store current PC Adjust status (each parameter status such as Total dots) to Mode1~Mode5. This command operates the same way as storing to Mode1-Mode5 in PC Adjust MENU. This command is available in normal Power ON status. Acceptable "000"[CR] Response Unacceptable "101"[CR] ---- When Input for Video is selected 8.5.9 CF_PCMODEFREE Command Command "CF_PCMODEFREE_%1"[CR] "MODE1" ---- Set Mode1 to Free status "MODE2" ---- Set Mode2 to Free status %1 "MODE3" ---- Set Mode3 to Free status "MODE4" ---- Set Mode4 to Free status "MODE5" ---- Set Mode5 to Free status Details Delete the registered data in Mode1-Mode5 and turns it to Free status. This command operates the same as turning Mode1-Mode5 to Free in PC Adjust Menu. This command is available in normal Power ON status. Acceptable "000"[CR] Response Unacceptable "101"[CR] ---- When Input for Video is selected 22/67