Sanyo PLC-XC50A RS232C Extend - Page 37

PLC-XC50/55 Expand Serial Command Functional Specifications 8.10.14 CF_ON - STA Command Command "CF_ON STA_%1"[CR] "ON Set Power On Start to ON "OFF Set Power On Start to OFF %1 "UP Switch setting (On → Off → On → ) "DN Switch setting (On → Off → On → ) Note) "UP" and "DN" behave the same. Details Set/Cancel Power ON Start The status set by this command is stored in EEPROM and its setting is effective after ALL is OFF This command is available in normal Power ON status. Acceptable "000"[CR] Response Unacceptable "Error Code"[CR] 8.10.15 CF_CCAPTIONDISP Command Command "CF_CCAPTIONDISP_%1"[CR] "OFF Select Off "CC1 Select CC1 "CC2 Select CC2 "CC3 Select CC3 "CC4 Select CC4 Details Switch Closed Caption channels. The status set by this command is stored in EEPROM and its setting is effective after ALL is OFF. This command is available in normal Power ON status. Acceptable "000"[CR] Response Unacceptable "Error Code"[CR] 8.10.16 CF_CCAPTIONCOLOR Command Command "CF_CCAPTIOPNCOLOR_%1"[CR] "COLOR Select Color "WHITE Select White Details Set up Closed Caption display color. The status set by this command is stored in EEPROM and its setting is effective after ALL is OFF. This command is available when projector is in normal Power ON status and its condition is; appropriate signal (NTSC signal from Video, S-video input or Component (480i)) being transmitted and System setting is set to NTSC/480i fixed. Acceptable "000"[CR] Response Unacceptable "Error Code"[CR] 8.10.17 CF_FILH Command Command "CF_FILH_%1"[CR] %1 "RST Reset Filter used time Details Reset filter used time Acceptable "000"[CR] Response Unacceptable "Error Code"[CR] 37/67