Sanyo PLC-XC50A RS232C Extend - Page 47
CR_V - POS Command, CR_DDOTS Command, CR_DLINE Command, CR_PCSTORE Command
View all Sanyo PLC-XC50A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
PLC-XC50/55 Expand Serial Command Functional Specifications 9.5.5 CR_V - POS Command Command "CR_V - POS"[CR] Details Get Vertical Position value Acceptable "000_%a"[CR] Response %a "0000"~"nnnn" (nnnn = Total Line - Display Line) Unacceptable "Error Code"[CR] ----- The command is invalid due to condition such as invalid input source 9.5.6 CR_DDOTS Command Command "CR_DDOTS"[CR] Details Get Display Dots value Acceptable "000_%a"[CR] Response %a "0100"~"nnnn" (nnnn = Total Dots - Horizontal Position value) Unacceptable "Error Code"[CR] ----- When the command is invalid due to condition such as invalid input source 9.5.7 CR_DLINE Command Command "CR_DLINE"[CR] Details Get Display Line value Acceptable "000_%a"[CR] Response %a "0100"~"nnnn" (nnnn = Total Line - Vertical Position value) Unacceptable "Error Code"[CR] ----- The command is invalid due to condition such as invalid input source 9.5.8 CR_PCSTORE Command Command "CR_PCSTORE"[CR] Details Get Free/Stored status of MODE1 - MODE5 for PC Adjust Each data consists of 5 bytes. Each byte indicates the status of MODE1~MODE5 respectively. (F:Free S:Stored) Acceptable "000_%a"[CR] "FFFFF All Free "SFFFF MODE1 is Stored, others are Free Response %a : "FFFFS MODE5 is Stored, others are Free "SSSSS All Stored Unacceptable "Error Code"[CR] 47/67