Sanyo PLC-XC50A RS232C Extend - Page 27

PLC-XC50/55 Expand Serial Command Functional Specifications 8.7 Screen Control Command 8.7.1 CF_SCREEN Command Command "CF_SCREEN_%1"[CR] "NORMAL Select Normal size "TRUE Select True size "WIDE Select Wide size "FULL Select Full size "CUSTOM Select Custom size "DZOOM_UP Expand image size with Digital Zoom Input is "DZOOM_DN Reduce image size with Digital Zoom Computer "UP Switch selectable screen size in forward direction (Normal -- True - Wide -- Full -- Custom -- Normal... ) %1 "DN Switch selectable screen size in backward direction (Normal - Custom - Wide -- Normal -- Custom...) Input is Video "NORMAL Select Normal mode "WIDE Select Wide mode "CUSTOM Select Custom size "UP Switch selectable screen size in forward direction "DN Switch selectable screen size in backward direction Details Select image size on screen. When Input specified by %1 is inappropriate for selected Input, the projector returns "101" [CR] and the command is not executed. "DZOOM UP" and "DZOOM DN" start effecting from the first command. This command is available in normal Power ON status. Note) When Input is computer and AV sorts signals (480i / 575i...etc) are entered, the signal recognized as Video Input. Acceptable "000"[CR] Response Unacceptable "Error Code"[CR] 8.7.2 CF_DZCENT Command Command "CF_DZCENT_%1"[CR] %1 "_CENT" ---- Cancel Digital Zoom (CENT: "CENTER") Details Cancel Digital Zoom When image is expanded or shrunk, reset its value. This command is available in normal Power ON status and when Input is Computer. Acceptable "000"[CR] Response Unacceptable "101"[CR] ------ when Input for Video is selected 27/67