Sanyo PLC-XC50A RS232C Extend - Page 28
CF_KEYSTONE Command, CF_KYSTNMODE Command, CF_VSCALE Command
View all Sanyo PLC-XC50A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
PLC-XC50/55 Expand Serial Command Functional Specifications 8.7.3 CF_KEYSTONE Command Command "CF_KEYSTONE_%1"[CR] "UP Correct Keystone distortion to reduce upper part of image "FUP Correct Keystone distortion to reduce upper part by 2steps %1 "DN Correct Keystone distortion to reduce lower part of image "FDN Correct Keystone distortion to reduce lower part by 2steps "RST Set Keystone OFF Details Change Keystone distortion correction This command is available in normal Power ON status. Acceptable "000"[CR] Response Unacceptable "Error Code"[CR] "201"[CR] ----When reaching the Keystone correction limit or reaching 1 step to correction limit and "FDN"/"FUP" is received. (The command is not executed) 8.7.4 CF_KYSTNMODE Command Command "CF_KYSTNMODE_%1"[CR] %1 "STR" --------- Set Keystone store mode to Store "RST" --------- Set Keystone store mode to Reset Details Set Keystone store mode This command is available in normal Power ON status. Acceptable "000"[CR] Response Unacceptable "Error Code"[CR] 8.7.5 CF_VSCALE Command Command "CF_VSCALE_%1"[CR] "032 32 "031 31 "002 2 "001 1 "000 0 %1 "-01 1 "-02 2 "-31 31 "-32 32 "UP Vertical Scale setting value + 1 "DN Vertical Scale setting value - 1 Details Set Vertical Scale This command is available in normal Power ON status. Note1) When Screen setting is not Custom, projector returns 101[CR] and the command does not execute. Note2) When there is no Input, projector returns 101 and the command does not execute. Acceptable "000"[CR] Response Unacceptable "Error Code"[CR] 28/67