Sony DSR 45A Operating Instructions - Page 67
Set EXT SYNC on the VIDEO SET menu to ON, phase alignment with the black burst signal
UPC - 027242689602
View all Sony DSR 45A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
5 Set EXT SYNC on the VIDEO SET menu to ON, then play back a tape on this unit. 6 Press the A channel button on the vectorscope. The vectorscope displays the sync phase and subcarrier phase (composite signals only) of the signal from this unit. 7 Adjust the SYNC control using H PHASE on the VIDEO SET menu for rough adjustment, then adjust H PHASE F for fine adjustment, so that the output from this unit on channel (A) is in correct phase alignment with the black burst signal on channel (B). 8 Adjust the SC control using SC PHASE on the VIDEO SET menu for rough adjustment, then adjust SC PHASE F for fine adjustment, so that the output from this unit on channel (A) is in correct phase alignment with the black burst signal on channel (B). (for NTSC) This indicator moves as you adjust the H PHASE or H PHASE F menu. Chapter 4 Setting the Time Code and Adjusting the Video Signals This indicator moves as you adjust the SC PHASE or SC PHASE F menu. Adjust the sync and subcarrier phase of the output signal from this unit. (for PAL) This indicator moves as you adjust the H PHASE or H PHASE F menu. This indicator moves as you adjust the SC PHASE or SC PHASE F menu. Adjust the sync and subcarrier phase of the output signal from this unit. Note When component signals are used, the subcarrier phase indicator does not appear. 67 Chapter 4 Setting the Time Code and Adjusting the Video Signals (GB)