Sony HDR-AX2000 Operating Guide (Large File - 11.29 MB) - Page 18
After charging the battery, To remove the battery pack, Charging time - light
UPC - 027242781733
View all Sony HDR-AX2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Step 3: Charging the battery pack (Continued) 5 Set the POWER switch to OFF (CHG). The CHG lamp lights up and charging starts. To remove the battery pack Slide the POWER switch to OFF (CHG). Push the BATT RELEASE (battery release) button and remove the battery pack. After charging the battery The CHG lamp turns off when the battery is fully charged. Disconnect the AC Adaptor from the DC IN jack. z Tips • You can check the remaining battery life with the status check function (p. 50). 18 BATT RELEASE (battery release) button To store the battery pack If the battery pack is not in use for a while, run down the battery and store it. See page 101 for details on storage of the battery pack. Charging time Approximate time (min.) required when you fully charge a fully discharged battery pack. Battery pack NP-F570 (supplied) NP-F770 NP-F970 Charging time 260 370 485 b Notes • You cannot use the NP-F330 battery pack with your camcorder. On the battery pack • Before changing the battery pack, slide the POWER switch to OFF (CHG). • The CHG lamp flashes during charging, or the Battery Info (p. 50) will not be correctly displayed under the following conditions. - The battery pack is not attached correctly. - The battery pack is damaged. - The battery pack is worn-out.