Sony HDR-AX2000 Operating Guide (Large File - 11.29 MB) - Page 19
Step 4: Turning the power on and holding your camcorder properly, Using an outside power source
UPC - 027242781733
View all Sony HDR-AX2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Getting Started - The battery pack is too cold. Remove the battery pack and put it in a warm place. - The battery pack is too hot. Remove the battery pack and put it in a cool place. • The power will not be supplied from the battery as long as the AC Adaptor is connected to the DC IN jack of your camcorder, even when the power cord (mains lead) is disconnected from the wall outlet (wall socket). On the charging time • Time measured with the camcorder at 25 °C (77 °F). 10 °C to 30 °C (50 °F to 86 °F) is recommended. Using an outside power source You can use the AC Adaptor to obtain the AC power. While you are using the AC Adaptor, the battery pack will not lose its charge even when it is attached to your camcorder. Connect your camcorder as shown in "Step 3: Charging the battery pack" on page 17. On the AC Adaptor • Do not short-circuit the DC plug of the AC Adaptor or battery terminal with any metallic objects. This may cause a malfunction. Step 4: Turning the power on and holding your camcorder properly To record or play back, set the POWER switch to ON. When you use your camcorder for the first time, the [CLOCK SET] screen appears (p. 22). POWER switch 1 Slide the POWER switch to ON while pressing the green button. Press and hold the green button. b Notes • The current date and time appear on the LCD screen for a few seconds when you turn on your camcorder after you set the date and time with [CLOCK SET] (p. 22). Continued , 19