Sony HDR-AX2000 Operating Guide (Large File - 11.29 MB) - Page 31
Adjusting the image brightness, Using the expanded focus Expanded, focus
UPC - 027242781733
View all Sony HDR-AX2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
Using the expanded focus (Expanded focus) [EXPANDED FOCUS] is assigned to the ASSIGN 7 button (p. 43). Press the ASSIGN 7 button. [EXPANDED FOCUS] appears and the center of the screen is magnified by about 2.0 times. It will be easier to confirm the focus setting during manual focusing. The screen returns to the original size when you press the button again. b Notes • Even though the image appears expanded on the screen, the recorded image is not expanded. z Tips • You can select a type of an expanded image displayed during the expanded focus ([EXPANDED FOCUS TYPE], p. 78). Focusing on a distant subject (Focus infinity) Slide the FOCUS switch B to INFINITY and hold it there. appears on the screen. To return to manual focus mode, release the FOCUS switch B. This function enables you to set focus on a distant subject even when the focus is automatically set on a close subject. b Notes • This function is only available during the manual focus. It is not available during the automatic focus. Adjusting the image brightness You can adjust the image brightness by adjusting the iris, gain or shutter speed, or by reducing the light volume with the ND filter B. b Notes • You cannot use the back light function and the spotlight function when iris, gain and shutter speed are adjusted manually. • [AE SHIFT] is not effective temporarily while you adjust the iris, gain and shutter speed all manually. Adjusting the iris You can manually adjust the iris to control the volume of the light entering the lens. By adjusting the iris, you can change or close ( ) the aperture of the lens, which is expressed as an F value between F1.6 and F11. The volume of the light increases the more that you open the aperture (decreasing F value). The volume of the light decreases the more that you close the aperture (increasing F value). The current F value appears on the screen. 1 During recording or standby, set the AUTO/MANUAL switch H to MANUAL. Continued , 31 Recording/Playback