Sony HDR-AX2000 Operating Guide (Large File - 11.29 MB) - Page 90
Connecting to TV, The image appears distorted on the 4:3 TV.
UPC - 027242781733
View all Sony HDR-AX2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 90 highlights
Troubleshooting (Continued) Connecting to TV Neither image nor sound is played back on the TV connected with the component video cable. • Set [VIDEO OUT] according to the requirements of the connected device (p. 74). • When you are using the component video cable, make sure that you connect the red and white plugs of the A/V connecting cable (p. 51). Neither image nor sound is played back on the TV connected with the HDMI cable. • Pictures are not output from the HDMI OUT jack, if copyright protection signals are recorded in the pictures. • Signals are not output from the HDMI OUT jack when the USB jack is connected. Neither image nor sound is played back on the TV, projector, or AV amplifier connected with the HDMI cable. • If you cannot view images or hear sound on the TV, projector, or AV amplifier connected with the HDMI cable, try disconnecting and connecting the HDMI cable, or turn on your camcorder again. The image appears distorted on the 4:3 TV. • This happens when viewing a movie recorded in 16:9 (wide) mode on a 4:3 TV. Select [REC/ OUT SET] t [VIDEO OUT] t [TV TYPE] t the appropriate down conversion type (p. 74). Black zone appears at top and bottom of a 4:3 TV screen. • This happens when viewing a movie recorded in the 16:9 (wide) mode on a 4:3 TV. This is not a malfunction. 90