Sony HXRNX80 Operating Instructions - Page 46

Adjusting the brightness (Continued) adjustment, set the ND filter to 2. If flashes during the iris automatic adjustment, set the ND filter to 3. The ND filter indicator will stop flashing and remain on the screen. If flashes, set the ND filter E to OFF. The ND filter icon will disappear from the screen. b Notes • If you change the ND filter E during recording, the movie and sound may become distorted. • When adjusting the iris manually, the ND filter icon does not flash even if the light level should be adjusted with the ND filter. • If the camcorder cannot detect the ND filter position (OFF/1/2/3), flashes on the screen. Make sure that the ND filter is set correctly. z Tip • While recording a bright subject, diffraction may occur if you close the aperture further down, resulting in a fuzzy focus (this is a common phenomenon with video cameras). The ND filter E suppresses this phenomenon and gives better recording results. Adjusting the color tone Adjusting the white balance You can adjust and fix the white balance according to the lighting conditions of recording environment. You can store white balance values in memory A ( A) and memory B ( B), respectively. Unless a white balance is readjusted, values will remain even after the power has been turned off. When you select PRESET, [OUTDOOR], [INDOOR] or [MANU WB TEMP] is selected, according to which one you previously set with [WB PRESET] in the (CAMERA SET) menu. 1 Set the AUTO/MANUAL switch B to MANUAL. 2 Press the WHITE BALANCE button A. The white balance value is highlighted. 3 Turn the MANUAL dial to select PRESET, A, or B. 46