Sony KD-34XBR960N Operating Instructions - Page 120

TIMER/STAND BY LED on, Problem, Possible Remedies

Page 120 highlights

Other Info Problem Possible Remedies TV makes "popping" sound ❏ This is a normal sound that results from the TV automatically degaussing when turned on each time it is turned on. TIMER/STAND BY LED on ❏ The LED (see page 14) blinks when the TV is turned on, then shuts off front panel is lit when the picture is displayed. If the LED blinks for more than a minute, this may indicate the TV needs service. When lit, indicates that the timer is set (page 108). When the timer is set, this LED will remain lit even when the TV is turned off. Digital cable box does not ❏ If you are connecting a VCR and digital cable box using a splitter, as work described on page 26, you must use a special bi-directional splitter that is designed to work with your digital cable box. Contact your cable TV company for details. Cannot record digital ❏ Only analog channels can be recorded to your VCR. channels to VCR The signal from a selected ❏ If you have several i.LINK devices connected and operating at once, the TV i.LINK device is not being may not be able to display the signal from the selected device. Turn the displayed other i.LINK devices off, and reselect the desired i.LINK device. ❏ If you are using a digital VCR, turn off any Auto LINC functionality of the VCR. For details, see the digital VCR's user manual. Other SETUP SETUP SETUP Other Info 119

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127

119
Other Info
Other
Other Info
SETUP
SETUP
SETUP
TV makes “popping” sound
when turned on
This is a normal sound that results from the TV automatically degaussing
each time it is turned on.
TIMER/STAND BY LED on
front panel is lit
The LED (see page 14) blinks when the TV is turned on, then shuts off
when the picture is displayed. If the LED blinks for more than a minute,
this may indicate the TV needs service. When lit, indicates that the timer is
set (page 108). When the timer is set, this LED will remain lit even when
the TV is turned off.
Digital cable box does not
work
If you are connecting a VCR and digital cable box using a splitter, as
described on page 26, you must use a special bi-directional splitter that is
designed to work with your digital cable box. Contact your cable TV
company for details.
Cannot record digital
channels to VCR
Only analog channels can be recorded to your VCR.
The signal from a selected
i.LINK device is not being
displayed
If you have several i.LINK devices connected and operating at once, the TV
may not be able to display the signal from the selected device. Turn the
other i.LINK devices off, and reselect the desired i.LINK device.
If you are using a digital VCR, turn off any Auto LINC functionality of the
VCR. For details, see the digital VCR’s user manual.
Problem
Possible Remedies