Sony KD-34XBR960N Operating Instructions - Page 46
Setting Up the Channel List, Using Initial Setup
View all Sony KD-34XBR960N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
SETUP Setting Up the Channel List After you finish connecting the TV, you need to run the Initial Setup feature, which automatically creates a list of available analog and digital channels and lets you correct tilt and vertical correction settings. The Initial Setup screens appear when you turn on your TV for the first time after hooking it up. Setup SETUP SETUP Using Initial Setup z For more details on using Tilt Correction and Vertical Correction, see pages 105106. z To exit the Tilt Correction and Vertical Correction screens, press the MENU button. z If you are using a CableCARD, Auto Program is disabled for the CABLE input. To run Initial Setup 1 Press POWER to turn on the TV. The Initial Setup screen appears. 2 Using the joystick on the remote control, move the highlight to the desired language, then press to select that language. The Tilt Correction screen appears. 3 Move the joystick B b to correct any tilt of the picture. You can choose a correction between +7 and -7. When finished, press . The Vertical Correction screen appears. 4 Move the joystick V v to make a vertical correction to the picture. You can choose a correction between +5 and -5. When finished, press . 5 The next screen instructs you to connect your cable/antenna. Check that you've connected your signal source correctly. To start Auto Program, move the joystick to highlight Yes and then press . Auto Program automatically creates a list of receivable analog and digital channels. Auto Program may take 50 minutes or more to complete. A progress bar is displayed while the channel list is being created. When the channel list is completed, the lowest numbered channel is displayed. To run Auto Program at a later time ❑ Use the Auto Program feature as described on page 100. To add individual digital channels Use the Digital Channel feature as described on page 100. To reset the TV to factory settings 1 Press POWER to turn on the TV. 2 Hold down RESET on the remote control. 3 Press TV POWER on the TV. (The TV will turn itself off, then back on.) 4 Release RESET. 45 SETUP SETUP