Sony KD-34XBR960N Operating Instructions - Page 21
Cable Box and Cable Only, For best results, use this connection if, With this connection you can
View all Sony KD-34XBR960N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
SETUP Setup SETUP Cable Box and Cable Only Before connecting a cable box, see "About Using CableCARD" on page 17. For best results, use this connection if: ❑ Your cable TV company scrambles some channels, such as premium channels (which requires you to use a cable box), but does not scramble all channels. ❑ You do not have a VCR. (If you have a VCR, see pages 24 and 26.) With this connection you can: ❑ Use the TV remote control to change channels coming through the cable box to the TV's VHF/UHF input jack. (You must first program the remote control for your specific cable box; see "Programming the Remote Control" on page 51.) ❑ Use the TV remote control to change channels coming directly into the TV's CABLE input. (The TV's tuner provides a better signal than the cable box.) Splitter Coaxial cable CATV cable Coaxial cable Coaxial cable Cable box TV VHF/UHF CABLE About Using This Connection with Dual Picture (Twin View, etc.) Features With this connection, you can use all the dual picture features for unscrambled channels coming directly into the TV's CABLE input jack. Notes on Using This Connection To Do This ... Do This ... Use the cable box Tune the TV to the channel the cable box is set to (usually channel 3 or 4) and then use the cable box to switch channels. Set up the TV remote control Program the remote control. See "Programming the Remote Control" on to operate the cable box pages 51-52. Activate the remote control to Press SAT/CABLE FUNCTION. operate the cable box Switch the TV's input between the cable box and cable Press ANT to switch back and forth between the TV's VHF/UHF (scrambled channels) and CABLE (unscrambled) inputs. SETUP SETUP SETUP 20