Sony KLV-21SG2 Operating Instructions - Page 15
Connecting an Audio Receiver
View all Sony KLV-21SG2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Connecting an Audio Receiver Installing and Connecting the TV Disconnect all power sources before making any connections. Using an AUDIO cable, connect the TV's AUDIO OUT jacks to the audio receiver's AUDIO IN jacks. Rear of TV AUDIO-L (white) AUDIO-R (red) Audio input AUDIO cable (not supplied) Audio receiver (Compact AV system DAV-FC9, etc.) When using your audio system speakers Set "Speaker" in the (Audio) menu to "Off." The TV's sound is not output from the AUDIO OUT jacks when "Speaker" is set to "On." You can still control the volume output from your audio system using the TV's remote control (see "Programming the remote control" on page 30), by setting "Audio Out" in the (Audio) menu to "Variable." If you want to adjust the volume through your audio system, set "Audio Out" to "Fixed." Notes • The video signal is not output through the AUDIO OUT jacks. • When "Audio Out" in the (Audio) menu is set to "Variable," "Speaker" is to "Off," check if the speaker volume is moderate before switching "Speaker" from "Off" to "On." Otherwise, the speaker volume may get too loud. 15