Sony KLV-21SG2 Operating Instructions - Page 30
Operating Optional Equipment with Your TV Remote Control, Programming the remote control
View all Sony KLV-21SG2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Watching the TV Operating Optional Equipment with Your TV Remote Control Programming the remote control 5 3 4 2 1 The remote control is preset to operate Sony video equipment. Sony equipment Beta, ED Beta VCRs 8mm VCR VHS VCR DV VCR DVD player Programmable code number 303 302 301 348 751 If you have video equipment other than Sony video equipment that you want to control with the TV's remote control, use the following procedures to program the remote control. Note The equipment must have infrared (IR) remote capability in order to be used with this remote control. From the "Manufacturer's codes" listed on page 31, select the three-digit code number for the manufacturer's code of your equipment. If more than one code number is listed, try entering them one by one until you come to the correct code for your equipment. Use the code number to complete the following procedure. 1 Press CODE SET. 2 Press the function button you want to program. To program a cable box or a satellite receiver Press SAT/CABLE (FUNCTION). To program video equipment Press VCR/DVD (FUNCTION). 3 Enter the three-digit manufacturer's code number using the 0-9 buttons. 4 Press ENT (enter). 5 To check if the code number works, aim the TV's remote control at the equipment and press VCR/DVD and/or SAT/CABLE (POWER) that corresponds with that equipment. If it responds, the programming is completed. If not, try using the other codes listed for that manufacturer. Tips • If you enter a new code number, the code number you previously entered at that setting is erased. • In some rare cases, you may not be able to operate your equipment with the Sony remote control. In this case, use the equipment's own remote control unit. 30