Sony PRS-T1 User Guide (Printable Version) - Page 29
Battery status indicator - software
View all Sony PRS-T1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Method Data transfer mode Description You can install the Reader software, or transfer files from your computer to the Reader while charging. The Reader cannot be operated. After the USB storage screen is displayed on the Reader, it is detected on your computer, and the "READER" and "SETTING" drives appear on your computer. When the icon* turns into the icon, charging is complete. When charging is complete, disconnect the USB cable from the Reader and your computer. After a short time, the [Home] screen will appear. * This icon is only displayed when the Reader is in data transfer mode. Press the (Home) button. The [Home] screen appears. When the icon turns Charging into the icon, charging is complete. mode In this mode, the Reader is not detected by your computer. When charging is complete, disconnect the USB cable from the Reader and your computer. Note Your computer must be turned on to charge the Reader. The Reader will not be charged if your computer enters sleep mode or standby mode. Keep your computer turned on with a stable and continuous power supply while charging the Reader. The (Power) button cannot be used when the Reader is connected to your computer and charging. If you turn off the Reader by tapping [Settings] [Device Shutdown] while in charging mode, the Reader will stop charging. Tip You can also charge the Reader using the AC Adapter (PRSA-AC10/PRSA-AC1A, sold separately). This method of charging will take approximately 2 hours to fully charge the battery. To change from charge mode to data transfer mode, tap the status bar to display the notification window tap [USB connected]. Battery status indicator The battery status indicator shows the charging status or approximate remaining charge of the battery.