Sony SDM-X82 Operating Instructions - Page 7
Setup, Setup 1: Connect a computer equipped with the DVI output connector (digital RGB) - manual
View all Sony SDM-X82 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
Setup Before using your monitor, check that the following items are included in your carton: • LCD display • Power cord • HD15-HD15 video signal cable (analog RGB) • DVI-D video signal cable (digital RGB) • Audio cord (stereo miniplug) • Windows Utility/Macintosh Utility Disk • Warranty card • This instruction manual Setup 1: Connect a computer equipped with the DVI output connector (digital RGB) • Turn off the monitor and computer before connecting. • When connecting the computer to the monitor's HD15 input connector (analog RGB), refer to "Setup 2: Connect a computer equipped with the HD15 output connector (analog RGB)." Note Do not touch the pins of the video signal cable connector as this might bend the pins. 1 Remove the back cover. 2 Using the supplied DVI-D video signal cable (digital RGB), connect the computer to the monitor's DVI-D input connector (digital RGB) for INPUT1. to the DVI-D input connector (digital RGB) for INPUT1 to the computer's DVI output connector (digital RGB) DVI-D video signal cable (digital RGB) (supplied) Setup 2: Connect a computer equipped with the HD15 output connector (analog US RGB) Turn off the monitor and computer before connecting. Note Do not touch the pins of the video signal cable connector as this might bend the pins. 1 Remove the back cover. (continued) 7