Sony SDM-X82 Operating Instructions - Page 9
Setup 5: Bundle the cords and cables, Setup 6: Turn on the monitor and computer
View all Sony SDM-X82 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Setup 5: Bundle the cords and cables 1 Remove the arm cover. 2 Bundle the cords and cables inside of the stand. 3 Secure the cables and cords with the cable holder. 4 Replace the arm cover and back cover. 1 arm cover Hold at this point. 2 4 back cover Setup 6: Turn on the monitor and computer 1 Press the MAIN POWER switch on the left side of the monitor in the direction of [. The 1 (power) indicator lights up in red. MAIN POWER lights in red 2 Press the 1 (power) switch on the front right of the monitor. The 1 (power) indicator lights up in green. US 3 Note If you cannot bundle all of the cords and cables inside the stand, leave them hanging down outside the stand. lights in green 3 Turn on the computer. 4 Press the INPUT button repeatedly and select the desired input signal. The selected input signal indicator lights up and the picture appears on the screen. For more information, see "Selecting the input signal (INPUT button)" on page 11. The installation of your monitor is complete. If necessary, use the monitor's controls to adjust the picture (page 12). (continued) 9