Sony SDM-X82 Operating Instructions - Page 8
Setup 3: Connect the audio cord, Connecting to an IBM PC/AT or, compatible computer - monitor
View all Sony SDM-X82 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
2 Using the supplied HD15-HD15 video signal cable (analog RGB), connect the computer to the monitor's HD 15 input connector (analog RGB) for INPUT 1 or INPUT2. Connect the computer according to the following illustrations. x Connecting to an IBM PC/AT or compatible computer Setup 3:Connect the audio cord Connect the supplied audio cord to the corresponding monitor's audio input jack. Using the monitor's speakers or headphones, you can listen to sound from your computer or other audio equipment connected to the monitor's audio input jacks. For more information, see "Controlling the volume" on page 17. to the HD 15 input connector (analog RGB) for INPUT1 or INPUT2 to audio input to the computer's HD15 output connector (analog RGB) IBM PC/AT or compatible computer HD15-HD15 video signal cable (analog RGB) (supplied) x Connecting to a Macintosh to the HD 15 input connector (analog RGB) for INPUT1 or INPUT2 to audio output of the computer or other audio equipment audio cord (supplied) Setup 4:Connect the power cord 1 Connect the supplied power cord to the monitor's AC IN connector. 2 Connect it to a power outlet. to AC IN 1 to the computer's output connector HD15-HD15 video signal cable (analog RGB) (supplied) Macintosh When connecting a Macintosh computer, use an adapter (not supplied) if necessary. Connect the adapter to the computer before connecting the video signal cable. to power outlet power cord (supplied) 2 8