Sony SNC-RS44N User Guide - Page 107
Audio upload tab, Serial, admin., Enable
UPC - 027242254855
View all Sony SNC-RS44N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 107 highlights
Serial: Displays the serial number of the network camera. User: Displays the specified user ID and password. The password is shown as turned letters. Select all Click to select all the cameras in the camera list. This is useful, for example, when you delete all the cameras from the list or specify the same user ID and password for all cameras. User ID/Password Use this item when you specify the user ID and password to communicate with selected camera(s) only. Select camera(s) from the camera list and click this button. The following dialog opens. Type the user ID and password for the administrator and click OK. Notes • An error dialog appears if the specified IP address in the camera list is assigned for a device other than the network camera, or does not exist in the network. • You cannot add new cameras if the maximum of 256 cameras has been reached. Delete Click this button to delete the selected camera(s) from the camera list. Note on switching the tab If an error occurs when you switch from the Setting tab to the Audio upload tab or the Voice alert tab, the camera is shown in red. In this case, check the camera settings and the user ID and password settings. Audio upload tab Use this menu to transmit audio from the computer to the camera. You can transmit audio to multiple cameras displayed in the camera list simultaneously. Before transmitting, set Audio upload to Enable on the Common tab of the Camera menu. Others Note If you select multiple cameras from the camera list, the same user ID and password are set for all those selected cameras. The factory setting for both items is "admin." Add Use this item when you add a new network camera to the camera list manually. Click this button to open the following dialog. Type the IP address and port number of the camera to be added and click OK. (start) / (stop) Click (start) to start audio transmission. The transmission speed is displayed in the Bitrate box during transmission. You can adjust the microphone volume and enable/disable muting, if necessary. To stop audio transmission, click (stop). 107 Using the SNC audio upload tool - Transmitting Audio to Camera