Sony SNC-RS44N User Guide - Page 108
Voice alert tab, Obtain an IP address automatically, IP address, Model, Serial, Status, Ready - review
UPC - 027242254855
View all Sony SNC-RS44N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 108 highlights
Others Notes • Audio transmission stops if you switch the tab during transmission. • Audio may be interrupted when the IP address is changed if Obtain an IP address automatically (DHCP) is set on IP address in the Network menu. • Audio may be interrupted if you transmit it to many cameras simultaneously. Sound adjustment and indicators Adjust the microphone input volume by moving the slider bar. You can adjust the volume even during transmission. Click to enable/disable sound muting. The microphone input volume level is displayed. The transmission rate is displayed in the Bitrate box. Voice alert tab Use this menu to record sound via a microphone connected to the computer, and upload the recorded audio file to the camera. You can upload the audio file to multiple cameras selected from the camera list simultaneously. Click this button to hide the camera list. Click it again to display the camera list. Target camera(s) (Camera list) Displays the cameras selected with the camera select checkbox of the camera list in the Setting tab. The list shows the information and status of the selected cameras. IP address: Displays the IP address of the network camera. "DHCP" is shown at the end of the IP address when the IP address is obtained with a DHCP server. Tip During SSL communication, appears on the left side of the IP address of the camera. The model on sale in China does not support the SSL function. Model: Displays the model name of the network camera. Serial: Displays the serial number of the network camera. Status: Displays the current status of the camera. Ready: The camera is ready for connection. Connected: Camera connection was successful. Fault: Camera connection failed. Sending: Audio data is being transmitted. (playback) To start playback, open the recorded file or another audio file and click this icon. You can check the recorded sound or the contents of the selected audio file. During playback, the progress bar shows playback progress. (stop) Click to stop recording or playback. When you click it during recording, recording stops, and you can review the recorded sound or upload the recording to the camera. When you click it during playback, playback stops and the progress bar returns to the start position. (recording) Click to start recording of sound via the computer's microphone. Maximum recording time is 30 seconds. The codec specified in the Setting tab is used for the recording. The recorded file is displayed as "RecordedFile.vof." Notes • Recording or playback stops if you switch the tab during recording or playback. • The recorded file is not stored in the computer. 108 Using the SNC audio upload tool - Transmitting Audio to Camera