Sony SNC-RS44N User Guide - Page 23
Controlling the Camera on a Panorama Image, Facing the camera toward a specified point
UPC - 027242254855
View all Sony SNC-RS44N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Operating the Camera Controlling the Camera on a Panorama Image In the panorama window, a 360° view around the camera is displayed as a panorama image. When you click on the displayed panorama image, the camera faces the clicked area. SNC-RH124/RH164 To rotate the panorama image To rotate the panorama image in accordance with the camera's panning direction, set Panorama mode to Rotate in the System menu of the Administrator menu (page 32). (The mark on the panorama image indicates the panning home position.) Note The panorama image can be rotated only when a 360degree panorama image has been created using SNC toolbox. Panorama window To create a panorama image Create the panorama image with the supplied SNC toolbox. See page 99 for details. Tip The panorama image is a still picture converted from the image taken when you were going to create it with SNC toolbox. When the camera is moved or when the layout around the camera is changed, you should create the panorama image again. Facing the camera toward a specified point 1 Create a panorama image with SNC toolbox and display it. Two "Panorama Image" display formats are available: round image and round panorama image. You can select the desired display format by clicking to the upper right. 2 Click the point you want to watch in the panorama window. The camera is moved to face toward the clicked point, and the present image at the point is displayed in the monitor window. 23 Controlling the Camera on a Panorama Image