Sony SNC-RS44N User Guide - Page 46
Host name, Domain suffix, IPv6 setting, Common setting, IP address, Subnet mask, Default gateway
UPC - 027242254855
View all Sony SNC-RS44N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
Administrating the Camera IP address Configure the IP address for a wireless network. Obtain an IP address automatically (DHCP): Select this option when a DHCP server is installed on the network to allow IP address assignment. With this setting, the IP address is assigned automatically. Use the following IP address: Select this option when you set a fixed IP address. With this setting, specify the IP address, Subnet mask and Default gateway manually. Note When you select Obtain an IP address automatically (DHCP), make sure that a DHCP server is operating on the network. IP address Type the IP address of the camera. Subnet mask Type the subnet mask. Default gateway Type the default gateway. DNS server Configure the DNS server address. Obtain DNS server address automatically: Select this option to obtain the address of the DNS server automatically. This can be set only when Obtain an IP address automatically (DHCP) is selected in the Wireless tab. Use the following DNS server address: Select this option when you set a fixed address as the IP address of the DNS server. With this setting, specify the addresses on Primary DNS server and Secondary DNS server manually. Note When you select Obtain DNS server address automatically, make sure that a DHCP server is operating on the network. Primary DNS server Type the IP address of the primary DNS server. Secondary DNS server Type the IP address of the secondary DNS server, if necessary. MTU Enter the MTU value. (1000 to 1500) Host name Type the wireless network host name of the camera to be transmitted to the DHCP server. This setting is valid only when Obtain an IP address automatically (DHCP) is selected in the Wireless tab. Domain suffix Type the wireless network domain suffix of the camera to be transmitted to the DHCP server. This setting is valid only when Obtain an IP address automatically (DHCP) is selected in the Wireless tab. Note The domain suffix is sent to the DHCP server as FQDN (Fully Qualified Domain Name) information when Host name is set. IPv6 setting Configure the IPv6 network settings. IPv6 can be used simultaneously with IPv4. Only IPv6-specific details are explained here. For common details, see "IPv4 setting" on page 45. On/Off To use IPv6, select On. Prefix Enter the Prefix value. (0 to 128) MTU Enter the MTU value. (1280 to 1500) Common setting Type Select the network connection type. Ad hoc mode: Select this when connecting to a computer directly. With this setting, specify a wireless channel. Infrastructure mode: Select this when connecting to a computer via an access point or wireless router. Notes • The setting of the HTTP port number is common to the setting in the Network tab. • With Ad hoc mode, you cannot select Use WEP key automatically generated of WEP, or WPA or WPA2 on Security. • When you set Security to WPA or WPA2 and change Infrastructure mode to Ad hoc mode, Security setting is automatically changed to None. 46 Configuring the Network - Network Menu