Sony SNC-RS44N User Guide - Page 68

Administrating the Camera Recipient e-mail address Type the recipient e-mail address using up to 64 characters. You can specify up to three recipient e-mail addresses. Administrator e-mail address Type the Administrator e-mail address using up to 64 characters. This address is used for reply e-mails and sending system messages from the mail server. Subject Type the subject/title of the e-mail using up to 64 characters. When Alarm sending of the Alarm sending tab is set to On, an e-mail sent in response to alarm detection will indicate the type of alarm in the subject. S1 is added for sensor input 1 detection, S2 for sensor input 2 detection, S3 for sensor input 3 detection, S4 for sensor input 4 detection, MD is added for motion detection. Message Type the text of the e-mail using up to 384 characters. (A line break is equivalent to 2 characters.) OK/Cancel See "Buttons common to every menu" on page 29. Alarm sending Tab - Setting the email sending mode when detecting the alarm Set to send an e-mail linked with alarm detection by the external sensor input or by the built-in motion detection function. Alarm sending Select On to set sending an e-mail linked with alarm detection. File attachment Set whether an image file (JPEG file) is to be attached to the e-mail or not. When On is selected, the image file made using the settings below is attached. When Off is selected, only the message is sent. Image file name Type the file name you want to assign to the image to be attached to an e-mail. You can use up to 10 alphanumeric characters, - (hyphen) and _ (underscore) for naming. Suffix Select a suffix to be added to the file name. None: No suffix is added. The image file name is assigned to the image to be sent via e-mail. Date & time: The date & time suffix is added to the image file name. The date/time suffix consists of lower two-digits of the year (2 digits), month (2 digits), date (2 digits), hour (2 digits), minute (2 digits), second (2 digits), and sequential number (2 digits), thus adding 14digit number to the image file name. Sequence number: A sequential number of 10 digits between 0000000001 and 4294967295 and two fixed digits 00 are added to the image file name. Sequence number clear Click Clear to reset the Sequence number suffix to 1. Alarm Select the alarm to be linked with e-mail notification. Sensor input 1: The external sensor that is connected to sensor input1 of the camera I/O port. Sensor input 2: The external sensor that is connected to sensor input 2 of the camera I/O port. Sensor input 3: The external sensor that is connected to sensor input 3 of the camera I/O port. Sensor input 4: The external sensor that is connected to sensor input 4 of the camera I/O port. Tampering: An alarm that is triggered when the camera detects vibration or shaking. VMF: An alarm of the VMF detection function. Motion detection: The alarm detected by the motion detection function. Click Detection, and the motion detection menu is displayed to allow you to set the motion detection function (page 82). 68 Sending an Image via E-mail - e-Mail (SMTP) Menu