Sony SNC-RS44N User Guide - Page 64
Position at alarm, Preset, Group preset positions, OK/Cancel, Detection, Clear Thumbnail, Browse
UPC - 027242254855
View all Sony SNC-RS44N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
Administrating the Camera Position at alarm The camera can synchronize a preset position with Sensor input 1 or 2 or with the motion detection function. If an alarm is detected by the sensor input or the motion detection function, the camera automatically moves to the corresponding preset position. If you do not want to synchronize with any preset number, select none. Sensor input 1 (S1) Select a preset position to synchronize with the alarm from Sensor input 1. Sensor input 2 (S2) Select a preset position to synchronize with the alarm from Sensor input 2. Sensor input 3 (S3) Select a preset position to synchronize with the alarm from Sensor input 3. Sensor input 4 (S4) Select a preset position to synchronize with the alarm from Sensor input 4. Tampering (TP) Select the preset position to synchronize with the camera tampering detect alarm. VMF Select the preset position to synchronize with the VMF detection alarm. Motion Detection (MD) Select a preset position to synchronize with the alarm from the motion detection. Click Detection, and the motion detection menu is displayed to allow you to set the motion detection function (page 82). Note In the case where the synchronized preset position is specified, an alarm event that happens when the camera moves to the preset position will be invalid. Preset You can configure and save preset positions and thumbnails. Click Call to move the camera to a specified preset position and click Clear Thumbnail to delete the thumbnail information for the specified preset position. No. Select a preset number from 1 to 256 from the dropdown list. Name Type the preset position name of the selected preset number using up to 32 characters. Set Click to save the current camera position to the selected preset number. To save a preset position, operate as follows: 1 Move the camera to the position to be saved, while checking the image with the preview viewer. 2 Select a preset number for saving, and type the preset position Name. 3 Click the Set button. The camera position is saved. Call Click to move the camera to the preset position. Clear Thumbnail Click to delete the thumbnail of the sepecific preset position. Thumbnail Checking this checkbox registers a thumbnail when you register a preset position. Select a radio button to determine whether to register the current camera image as a thumbnail or to register with a specified image. To specify an image, click Browse. Then click Submit. Group preset positions You can sort preset positions into groups. The information of the preset positions registered in a group can be viewed from the group tree screen. By clicking the preset position in a group, the camera moves to the preset position. New Group You can register a new group. Rename You can rename the group and preset positions. Clear You can delete the group and preset positions. OK/Cancel See "Buttons common to every menu" on page 29. Note The OK/Cancel buttons are effective for the Position at Alarm setting in this tab. 64 Saving the Camera Position and Action - Preset position Menu