Sony SNC-RS44N User Guide - Page 32
PTZ mode, Auto flip, Panorama mode, Sensor input mode, Camera tampering detection, OK/Cancel
UPC - 027242254855
View all Sony SNC-RS44N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
Administrating the Camera Operation time Sets the time length for a user who has control authority. The selectable range is from 10 to 600 seconds. This is effective when Exclusive control mode is set to On. Maximum wait number Sets the number of users who are permitted to wait for their turn for control authority during operation by one user. The selectable number is from 0 to 10. This is effective when Exclusive control mode is set to On. Notes • To use Exclusive control mode, the date and time of the camera and the connected computer must be set correctly first. • To use Exclusive control mode, do not disable the Web browser Cookie. If it is disabled, this mode cannot be used. • When you change the Exclusive control mode setting, click Refresh on the Web browser to reflect the change when opening the main viewer page. PTZ mode Select the pan/tilt control mode using the 8-direction arrow buttons (page 21) and the zoom control mode using the / buttons (page 21). Select Normal or Step. Normal: When you click the mouse button, the camera starts panning, tilting or zooming, and the operation continues while you hold down the mouse button. To stop the operation, release the mouse button. Step: Each time you click the mouse button, the camera moves (pans, tilts or zooms). If you keep the mouse button held down for more than 1 second, the operation mode is temporarily changed to Normal. When you release the mouse button, camera operation stops and the Step mode is restored. When you select Step, Pan/Tilt level and Zoom level are selectable. Pan/Tilt level: Select the camera transition level from 1 to 10 by clicking the 8-direction arrow buttons for panning/tilting. Selecting 10 provides the maximum transition level. Zoom level: Select the camera transition level from 1 to 10 by clicking / for zooming. Selecting 10 provides the maximum transition level. Auto flip This function automatically switches the tilt movement of the camera downward to upward when the camera tilts downward to the point where it faces the ground. On: When you are tilting the camera downward using the , or buttons on the control panel, and the camera reaches the point where it faces the ground, it automatically starts tilting upward. Off: When the camera tilts to the point where it faces the ground, tilting stops. Latency While Auto flip is set to On, set the time duration before restarting tilt when the camera has tilted completely downward. Selectable values are 0 sec., 0.5 sec. are 0.75 sec. Horizontal tilt limit You can limit the tilt movement to not go beyond horizontal level. Panorama mode Select to rotate or not rotate the panorama image displayed in the viewer in accordance with the pan movement of the camera. Rotate: The panorama image rotates as the camera pans. Fixed: The panorama image is fixed. Sensor input mode Specify the detection mode of the signal input to the sensor input terminal of the camera. Normally open: Detects the alarm when the sensor input is short-circuited. Normally closed: Detects the alarm when the sensor input is open-circuited. Camera tampering detection Select On to activate the function to detect the camera shaking. When you select On, you can select the Tamper level. OK/Cancel See "Buttons common to every menu" on page 29. 32 Configuring the System - System Menu