Sony SNC-RS44N User Guide - Page 48
QoS Tab, Simple setting, OK/Cancel, IPv4 QoS setting
UPC - 027242254855
View all Sony SNC-RS44N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
Administrating the Camera EAP: Select for EAP authentication. When this option is selected, enabling the 802.1X (wireless) function is required. After selecting EAP, click OK at the bottom of the window. The 802.1X function is enabled. Note For correct operation of the 802.1X function, you need to configure the 802.1X settings, such as certificate setting, appropriately. For details on the 802.1X settings, see "Using the 802.1X Authentication Function - 802.1X Menu" on page 56. 802.1X This button is active when EAP is selected on Authentication. When you click 802.1X, the 802.1X menu appears, allowing you to configure the 802.1X (wireless) function. Passphrase Set a passphrase when PSK is selected on Authentication. Type 8 to 63 ASCII characters (alphanumeric), or up to 64 hexadecimal digits (0 to 9 and A to F). Re-type passphrase To confirm the passphrase, retype the passphrase that you typed in the Passphrase box. Simple setting Set up this item when Simple setting is selected on Security. You can easily connect to an access point compatible with WPS. Note This function is available for certain models only. OK/Cancel See "Buttons common to every menu" on page 29. QoS Tab In the QoS tab, traffic priority can be set by configuring the number, network address, subnet (prefix), port, protocol and/or DSCP of IPv4 or IPv6. A maximum of 10 addresses (No.1 to No.10) can be registered. IPv4 QoS setting Select On to configure the QoS setting for IPv4. Rule Used to register, edit and delete QoS. No. Select the number to use when registering on the QoS table. When you select a registered number, the registered QoS information is displayed. Network address Enter the address to perform QoS. Subnet Enter the subnet mask. Port Enter the port number. Protocol Select the protocol. DSCP Enter the DSCP value. 48 Configuring the Network - Network Menu